The main business of the company is: bladder accumulator, Diaphragm accumulator, Piston Type Accumulator, oxygen cylinder, CO2 cylinder, gas cylinder, nitrogen gas cylinder, Welcome to inquire and negotiate cooperation by phone.
About    |    Contact


Diagnosis and troubleshooting of common faults in accumulators

Diagnosing and troubleshooting common faults in accumulators, such as batteries, is crucial for maintaining their performance and reliability. Here’s a guide to help you diagnose and troubleshoot some common issues:

  1. Reduced Capacity or Runtime:
    • Diagnosis: If the accumulator’s capacity or runtime is reduced, it could indicate aging, sulfation, or over-discharge.
    • Troubleshooting: Check electrolyte levels (for flooded lead-acid batteries), perform a capacity test, ensure proper charging voltage and current, and consider equalization charging or desulfation methods if applicable.
  2. Overheating:
    • Diagnosis: Overheating may be caused by overcharging, excessive internal resistance, or short circuits within the battery.
    • Troubleshooting: Monitor charging voltage and current, inspect for loose connections or damaged wiring, and check for signs of overcharging or thermal runaway.
  3. Voltage Fluctuations:
    • Diagnosis: Fluctuating voltage can indicate a failing battery cell, poor connections, or issues with the charging system.
    • Troubleshooting: Measure individual cell voltages (if possible), inspect terminals and connections for corrosion or looseness, and test the charging system for proper voltage regulation.
  4. Slow Cranking or Starting:
    • Diagnosis: Slow cranking or difficulty starting may be due to insufficient accumulator capacity, poor connections, or a failing starter motor.
    • Troubleshooting: Test the battery voltage under load (during cranking), clean and tighten terminals and connections, and check the starter motor for proper operation.
  5. Premature Failure:
    • Diagnosis: Premature battery failure can result from factors such as overcharging, deep discharges, or manufacturing defects.
    • Troubleshooting: Review charging practices, inspect for signs of overcharging or deep discharges, and consider environmental factors such as temperature and vibration.
  6. Corrosion and Leakage:
    • Diagnosis: Corrosion and leakage around terminals or casing may indicate acid leaks or poor maintenance.
    • Troubleshooting: Inspect the battery casing for cracks or damage, clean terminals and cable ends, and ensure proper electrolyte levels and venting.
  7. Sudden Voltage Drop:
    • Diagnosis: A sudden voltage drop during operation can indicate an internal short circuit or cell failure.
    • Troubleshooting: Perform a capacity test, inspect for physical damage or signs of leakage, and consider replacing the battery if necessary.

Always follow safety precautions when working with batteries, such as wearing protective gear and avoiding sparks or open flames. If you’re unsure about diagnosing or troubleshooting battery issues, seek assistance from a qualified technician or accumulator specialist.



Leave a Reply