The main business of the company is: bladder accumulator, Diaphragm accumulator, Piston Type Accumulator, oxygen cylinder, CO2 cylinder, gas cylinder, nitrogen gas cylinder, Welcome to inquire and negotiate cooperation by phone.
About    |    Contact

NewsNotification

Expert Tips on How to Move Diaphragm Accumulators Safely and Effectively

Moving diaphragm accumulators safely and effectively requires careful planning and execution. These accumulators, commonly used in industrial applications to store and regulate fluid pressure, can be heavy and cumbersome, making them a challenge to move without proper techniques and equipment. Here are some expert tips on how to accomplish this task safely:

  1. Assess the Situation:
    • Determine the size, weight, and condition of the diaphragm accumulator.
    • Evaluate the surrounding environment, including access points, obstacles, and potential hazards.
  2. Prepare the Equipment:
    • Use appropriate lifting equipment such as a crane, forklift, or pallet jack based on the size and weight of the accumulator.
    • Ensure the lifting equipment is in good working condition and has been inspected regularly.
    • Prepare any necessary safety equipment like harnesses, gloves, and eye protection.
  3. Secure the Accumulator:
    • Use straps or chains to secure the accumulator to the lifting equipment to prevent it from shifting or falling.
    • Make sure the lifting attachments are rated for the weight of the accumulator.
  4. Plan the Route:
    • Map out the safest and most efficient route to move the accumulator.
    • Identify any potential obstacles or hazards along the route and plan how to navigate them safely.
  5. Communicate with Team Members:
    • Ensure all team members involved in the move are aware of the plan and their specific responsibilities.
    • Assign a spotter to monitor the accumulator’s position and stability during the move.
  6. Perform a Test Lift:
    • Before lifting the accumulator, perform a test lift to ensure the lifting equipment is working properly and the accumulator is securely attached.
  7. Lift and Move Slowly:
    • When lifting the accumulator, use a slow and controlled motion to avoid sudden jerks or movements.
    • Maintain a stable and level position throughout the move.
  8. Monitor Stability:
    • Continuously monitor the accumulator’s stability during the move.
    • Stop and inspect the accumulator if any unusual movements or sounds are detected.
  9. Place Carefully:
    • When placing the accumulator at its destination, ensure it is on a stable and level surface.
    • Use blocks or shims to adjust the level if necessary.
  10. Inspect After Move:
    • After the accumulator has been moved, inspect it for any damage or abnormalities.
    • Ensure all connections and fittings are tight and secure.

Remember, safety should always be the top priority when moving diaphragm accumulators. By following these tips and using the appropriate equipment and techniques, you can ensure a safe and effective move.

Prev:

Next:

Leave a Reply