The main business of the company is: bladder accumulator, Diaphragm accumulator, Piston Type Accumulator, oxygen cylinder, CO2 cylinder, gas cylinder, nitrogen gas cylinder, Welcome to inquire and negotiate cooperation by phone.
About    |    Contact

News

How to Properly Clean and Maintain Your Diaphragm Accumulators

To properly clean and maintain your diaphragm accumulator, the following are some detailed steps and points for your reference:
1、 Preparation work
Understanding products:
Refer to the product manual to understand the design, working principle, and specific maintenance requirements of diaphragm accumulators.
Pay attention to the maximum working pressure (such as 350bar mentioned in reference article 1) and other key specifications.
Choose the appropriate cleaning agent:
Choose a suitable cleaning agent based on the material and working environment of the accumulator.
Avoid using chemicals that may damage the surface of rubber or metal.
Security protection:
Ensure good ventilation in the work area.
Wear appropriate protective clothing, gloves, and goggles.
2、 Cleaning steps
Close and empty:
Close all valves connected to the accumulator to ensure that the system is completely closed.
If possible, empty the gas and liquid inside the accumulator to reduce the risk during cleaning.
disassemble:
According to the instructions in the product manual, carefully disassemble the parts that need to be cleaned.
Be careful not to damage the diaphragm or other sensitive components.
Preliminary cleaning:
Use a soft cloth or brush to remove surface dirt and dust.
For stains that are difficult to remove, a mild cleaning agent can be used for initial cleaning.
Deep cleaning:
For internal components, it may be necessary to use high-pressure gas or specific cleaning fluids for deep cleaning.
Ensure that all components are thoroughly cleaned and free of residue.
Inspection:
During the cleaning process, carefully inspect all components of the accumulator, especially the diaphragm section.
Check for signs of damage, wear, or leakage.
3、 Maintenance
Replace damaged parts:
If any components are found to be damaged or worn, they should be replaced immediately.
Use substitutes that are the same or better than the original components.
Reassembly:
After cleaning and inspection, reassemble the accumulator according to the instructions in the product manual.
Ensure that all components are correctly installed and tightened.
Testing:
Before reuse, test the accumulator to ensure its performance and safety meet the requirements.
Training:
Ensure that only trained professionals carry out cleaning and maintenance work on the accumulator.
By following the above steps and precautions, you can properly clean and maintain your diaphragm accumulator, ensuring its stable performance, safety, and reliability.

Prev:

Next:

Leave a Reply