The main business of the company is: bladder accumulator, Diaphragm accumulator, Piston Type Accumulator, oxygen cylinder, CO2 cylinder, gas cylinder, nitrogen gas cylinder, Welcome to inquire and negotiate cooperation by phone.
About    |    Contact


Key Points to Remember While Dismantling a Diaphragm Accumulator

When disassembling a diaphragm accumulator, there are several key points to remember, which are summarized and summarized based on the provided reference article information:
Safety preparation:
Ensure that the system is in a safe state: Before disassembly, stop the system operation and release the pressure inside the system through appropriate means.
Use appropriate tools and equipment: Ensure the use of appropriate tools to reduce pressure in the system and ensure safe and controllable disassembly processes.
Personal protective equipment: Wear necessary safety glasses, gloves, and protective clothing to prevent accidental injury.
Tools and equipment: Prepare necessary tools and equipment, such as wrenches, screwdrivers, hydraulic pumps, etc.
System emptying: Confirm that the system where the accumulator is located has been emptied and ensure that the storage pressure of the accumulator has dropped to zero.
Environmental preparation: Move vehicles or equipment to a spacious and flat surface to ensure construction safety.
Disassembly steps:
Close the interface: To ensure safety, it is necessary to ensure that the interface is completely closed to avoid internal gas leakage.
Dismantling connection: Use a wrench or other suitable tool to remove the connecting nut and coupling between the accumulator and the pipeline.
Separation bracket: Separate the accumulator from the bracket or seat that secures it, and carefully move or remove any obstacles.
Release pressure: Before disassembly, the pressure inside the accumulator must be completely released to prevent injury.
Avoid contamination: During disassembly, cleaning, and inspection, avoid oil leakage that can cause contamination and danger.
Special tools and cleaning agents: Use special tools and cleaning agents for cleaning and inspection to avoid secondary pollution or damage to the accumulator.
Sealing gasket replacement: Check if the sealing gasket is aging or damaged, and replace it in a timely manner if necessary.
Subsequent work:
Cleaning and inspection: After removing the internal device, use a specialized cleaning agent for cleaning and inspect the internal structure for any damage or wear.
Reassembly and testing: Reassemble the accumulator according to the manufacturer’s instructions and conduct a comprehensive test and inspection before putting it back into use.
By following the above key points, it is possible to ensure safe and efficient operation when disassembling the diaphragm accumulator, while minimizing damage to the equipment and potential safety risks.



Leave a Reply