The main business of the company is: bladder accumulator, Diaphragm accumulator, Piston Type Accumulator, oxygen cylinder, CO2 cylinder, gas cylinder, nitrogen gas cylinder, Welcome to inquire and negotiate cooperation by phone.
About    |    Contact

News

Maintenance of accumulator(Ⅰ)

The most important maintenance of the accumulator is to maintain an appropriate charging pressure.

as time goes on. The charging pressure of all accumulators will decrease. Therefore, it is necessary to regularly check and charge to the specified value according to the use requirements. After charging the accumulator. The gas temperature and pressure increase.

After 5 to 10 minutes, the temperature has stabilized.

Retest the pressure. Proper inflation pressure is very important to prolong the service life of accumulator. When used to store energy. The inflation pressure of airbag accumulator is 80% of the minimum working pressure of the system. The charging pressure of piston accumulator is 0.7MPa lower than the minimum working pressure of the system. Excessive inflation pressure or reduced the minimum working pressure of the system. Failure to reduce the charging pressure will cause operational problems or damage the accumulator.

If you work with gas cylinder or information about our company. You can communicate with us on the website. Our official website is www.zpcylinder.com. Our cost-effective products are very popular.

Prev:

Next:

Leave a Reply