The main business of the company is: bladder accumulator, Diaphragm accumulator, Piston Type Accumulator, oxygen cylinder, CO2 cylinder, gas cylinder, nitrogen gas cylinder, Welcome to inquire and negotiate cooperation by phone.
About    |    Contact

Piston Accumulator/

SK 350 Series 2046 mm Height Piston Accumulator

310 mm
80.55 in2046 mm

  • Product Detail

The piston accumulator series SK350 is ZP’s most versatile series with a repairable design and large selection of options. The largest range of possible sizes, material construction, and other options are offered. Standard and Low Friction piston designs are available for superior performance and flow rates. Features of this series are: Bore Diameters from 2.4″ ID to 19.3″ ID, Sizes from 1 quart to 200 gallons, Largest range of possible sizes and material options, Standard and Low Friction piston designs available, Largest variety of gas and fluid port options, A variety of piston position sensor monitoring systems are available, ASME, CRN, PED/CE and other pressure code certifications are available.


Industry Standards/CertificationsASME
TypeRepairable Piston Accumulator
Connection TypeFlange
Seal MaterialNBR(-4 to 180F)
MediumNBR resistant to: Mineral Oils (HL, HLP), Non-flammable fluids from the HFA, HFB, HFC, Synthetic esters (HEES), Water, Sea Water; Not resistant to: Aromatic hydrocarbons, Chlorinated hydrocarbons (HFD-S), Amines and ketones, Operating fluids from the grou
MaterialCarbon Steel
Short DescriptionPiston Accumulators Series SK350
Operating Temperature [Min]-20 ºC-4 ºF
Operating Temperature [Max]80 ºC180 ºF
Connection Size2″ SAE Code 61
Operating Pressure [Min]0 bar0 psi
Operating Pressure [Max]210 bar3000 psi
Connection GenderFlange
Volume Capacity31.7 gal120 L
Pre-Charged Pressure0 bar0 psi
RechargeableFlange gas connection
Valve MaterialCarbon Steel
Model Code DescriptionSK350-120/2112S-210FCF-FCD-31H


Diameter310 mm
Height80.55 in2046 mm


ApplicationFluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas (nitrogen) is utilized in hydraulic accumulators for storing fluids. ZP piston accumulators are based on this principle. A piston accumulator consists of a fluid section and a gas section with the piston acting as a gas-proof separation element. The gas section is pre-charged with nitrogen. The fluid section is connected to the hydraulic circuit so that the piston accumulator draws in fluid when the pressure increases and the gas is compressed. When the pressure drops, the compressed gas expands and forces the stored fluid into the circuit.

If you work with gas cylinder or information about our company. You can communicate with us on the website. Our official website is Our cost-effective products are very popular.



Leave a Reply