The piston accumulator series SK350 is ZP’s most versatile series with a repairable design and large selection of options. The largest range of possible sizes, material construction, and other options are offered. Standard and Low Friction piston designs are available for superior performance and flow rates. Features of this series are: Bore Diameters from 2.4″ ID to 19.3″ ID, Sizes from 1 quart to 200 gallons, Largest range of possible sizes and material options, Standard and Low Friction piston designs available, Largest variety of gas and fluid port options, A variety of piston position sensor monitoring systems are available, ASME, CRN, PED/CE and other pressure code certifications are available.
Specifications
Industry Standards/Certifications
ASME
Type
Repairable Piston Accumulator
Style
Threaded
Connection Type
Flange
Seal Material
NBR(-4 to 180F)
Medium
NBR resistant to: Mineral Oils (HL, HLP), Non-flammable fluids from the HFA, HFB, HFC, Synthetic esters (HEES), Water, Sea Water; Not resistant to: Aromatic hydrocarbons, Chlorinated hydrocarbons (HFD-S), Amines and ketones, Operating fluids from the grou
Material
Carbon Steel
Series
SK350
Short Description
Piston Accumulators Series SK350
Operating Temperature [Min]
-20 ºC-4 ºF
Operating Temperature [Max]
80 ºC180 ºF
Connection Size
2″ SAE Code 61
Operating Pressure [Min]
0 bar0 psi
Operating Pressure [Max]
210 bar3000 psi
Connection Gender
Flange
Volume Capacity
31.7 gal120 L
Pre-Charged Pressure
0 bar0 psi
Repairable
Repairable
Rechargeable
Flange gas connection
Valve Material
Carbon Steel
Model Code Description
SK350-120/2112S-210FCF-FCE-25H
Dimensions
Diameter
250 mm
Height
112.44 in2856 mm
Application
Application
Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas (nitrogen) is utilized in hydraulic accumulators for storing fluids. ZP piston accumulators are based on this principle. A piston accumulator consists of a fluid section and a gas section with the piston acting as a gas-proof separation element. The gas section is pre-charged with nitrogen. The fluid section is connected to the hydraulic circuit so that the piston accumulator draws in fluid when the pressure increases and the gas is compressed. When the pressure drops, the compressed gas expands and forces the stored fluid into the circuit.
If you work with gas cylinder or information about our company. You can communicate with us on the website. Our official website is www.zpcylinder.com. Our cost-effective products are very popular.