The main business of the company is: bladder accumulator, Diaphragm accumulator, Piston Type Accumulator, oxygen cylinder, CO2 cylinder, gas cylinder, nitrogen gas cylinder, Welcome to inquire and negotiate cooperation by phone.
About    |    Contact


Seamless cylinder inspection rules

Seamless cylinders are containers used to store compressed gases and are commonly used in industrial, medical and laboratory applications. To ensure the safety and reliability of seamless cylinders, they need to be inspected periodically before use. The following are general rules for the inspection of seamless cylinders, which may vary depending on the region and application:

Periodic inspection: Seamless cylinders need to be inspected periodically to ensure their safety and reliability in use. The inspection intervals are usually specified by relevant standards or regulations.

Appearance Inspection: The appearance of the seamless cylinder is inspected, including checking for visible corrosion, deformation, cracks or other damage. If abnormalities are found, further inspection or repair may be required.

Wall Thickness Measurement: Measure the thickness of the seamless cylinder wall with a suitable tool to ensure that it is within the allowable range. A reduction in wall thickness may affect the strength and safety of the cylinder.

Gas Tightness Test: A gas tightness test is carried out by filling a seamless cylinder with gas at a certain pressure and using a suitable method to check whether the pressure can be maintained for a certain period of time. This ensures that there are no gas leaks or other sealing problems with the cylinder.

Material Analysis: Analyze the material of the seamless cylinder to ensure that it meets the relevant material standards and requirements. This includes inspections of material composition, strength, and other aspects.

Marking and certification: The marking and certification on the seamless cylinder is checked to ensure that it meets the relevant standards and regulatory requirements and that it has a qualified certification.

Recording and reporting: Record each inspection and report the results in a timely manner. This helps to keep track of the inspection history of seamless cylinders and to follow up and backtrack when needed.

It should be noted that the above are general seamless cylinder inspection rules, and specific inspection requirements may vary according to different applications, national standards and regulations. Therefore, when carrying out the inspection of seamless cylinders, you should refer to the specific local requirements and relevant standards to ensure the effectiveness and compliance of the inspection.



Leave a Reply