The main business of the company is: bladder accumulator, Diaphragm accumulator, Piston Type Accumulator, oxygen cylinder, CO2 cylinder, gas cylinder, nitrogen gas cylinder, Welcome to inquire and negotiate cooperation by phone.
About    |    Contact


The connection method of the accumulator

The connection method of an accumulator, often referred to as a battery, depends on the specific requirements of the application. Here are the primary connection methods:

  1. Series Connection: In a series connection, the positive terminal of one battery is connected to the negative terminal of another battery, and so on. This configuration increases the total voltage of the battery bank while maintaining the same capacity. For example, if you connect three 12-volt batteries in series, the total voltage output would be 36 volts.
  2. Parallel Connection: In a parallel connection, the positive terminals of all batteries are connected together, and the negative terminals are connected together. This configuration increases the total capacity of the accumulator bank while maintaining the same voltage. For instance, if you connect three 12-volt batteries in parallel, the total voltage output remains 12 volts, but the capacity (ampere-hours) increases.
  3. Series-Parallel Connection: This method combines both series and parallel connections. Batteries are grouped in series, and then these series groups are connected in parallel. This configuration allows for both increased voltage and capacity. It offers flexibility in meeting various voltage and capacity requirements.
  4. Distributed Connection: In some applications, batteries may be distributed throughout a system, with each battery serving a specific load or subsystem. This approach can provide redundancy and improve system reliability, particularly in critical applications where uninterrupted power supply is essential.

The choice of connection method depends on factors such as the desired voltage, capacity, space limitations, and the specific requirements of the system. Each method has its advantages and is chosen based on the needs of the application.



Leave a Reply