The main business of the company is: bladder accumulator, Diaphragm accumulator, Piston Type Accumulator, oxygen cylinder, CO2 cylinder, gas cylinder, nitrogen gas cylinder, Welcome to inquire and negotiate cooperation by phone.
About    |    Contact


Troubleshooting Guide: Handling Loss of Pressure in Accumulators

When dealing with loss of pressure in accumulators, the Troubleshooting Guide provides a series of steps and strategies to ensure effective diagnosis and resolution of the problem.

  1. Problem identification
    Confirm pressure loss: Firstly, it is necessary to clarify whether there is a real pressure loss. This may involve comparing the current pressure of the accumulator with its normal operating pressure range.
    Observing symptoms: Pay attention to any abnormal behavior or performance decline related to pressure loss, such as reduced output flow, decreased system efficiency, etc.
  2. Preliminary inspection
    External inspection: Check for obvious damage, leakage, or deformation on the outside of the accumulator.
    Interface and connection: Check if all pipes, valves, and joints connected to the accumulator are tight and leak free.
  3. Fault diagnosis
    System isolation: If possible, isolate the accumulator from the system to diagnose the problem more accurately.
    Use testing equipment: Use tools such as pressure gauges and leak detection agents to further diagnose the cause of pressure loss.
    Inspect internal components: If no issues are found during external inspections, it may be necessary to inspect the internal components of the accumulator, such as the piston, seals, and diaphragm.
  4. Problem solving
    Repair leakage: If a leak is found, the damaged components should be repaired or replaced immediately.
    Replace damaged components: If internal components are damaged, it may be necessary to replace the piston, seal, or the entire accumulator.
    Recharge: After repairing the problem, ensure that the accumulator is recharged to its normal operating pressure range.
  5. Preventive measures
    Regular maintenance: Implement a regular maintenance plan, including checking for leaks, replacing worn parts, and cleaning the accumulator.
    Use appropriate lubricants: Ensure the use of appropriate lubricants when needed to reduce friction and wear.
    By following the above Troubleshooting Guide, pressure loss issues in the accumulator can be effectively addressed, ensuring the normal operation of the system and extending the service life of the equipment.



Leave a Reply